Přeinstalování Windows 7
Moderátoři: Pic, Mods_senior
Přeinstalování Windows 7
Zdravím, mám Lenovo Ideapad Z580 a na něm nahraný Windows 7, který bych potřeboval přeinstalovat. Nikdy jsem ale OS nepřeinstalovával, mohli byste mi prosím poradit, jak na to?
Re: Přeinstalování Windows 7
Tento duplicitní účet byl založen a používán trollem Blue Spirit, který nerespektuje základní pravidlo fóra, kterým je zákaz zakládání účtů za účelem obcházení trvalého BANu, který před mnoha lety obdržel za nevhodné chování a opakované narušování chodu fóra. Na fórum nadává kde může, kritizuje ho, kritizuje všechny jeho stálé členy, přesto k nám stále a pořád "leze"...
Re: Přeinstalování Windows 7
Vskutku presna rada...
Pouzij flesku od nations112 (s tim, ze sezenes ovladace) nebo recovery oddil vyrobce (pokud se na to necitis).
Kazdopadne o co nechces prijit si dopredu zazalohuj.
Pouzij flesku od nations112 (s tim, ze sezenes ovladace) nebo recovery oddil vyrobce (pokud se na to necitis).
Kazdopadne o co nechces prijit si dopredu zazalohuj.
Prazaci jo ty se maj, az kdyz si me zavolaj..
-
nations112
- Level 4
- Příspěvky: 1043
- Registrován: 09 zář 2013 19:05
Re: Přeinstalování Windows 7
Všechno potřebné v popisu
-
SarahBishop
- nováček
- Příspěvky: 1
- Registrován: 16 srp 2017 08:13
Re: Přeinstalování Windows 7
Installation booted from CD/DVD
1. Set for CD/DVD boot: insert the installation CD into the optical disk drive (ODD) and restart PC. When starting up logo "LENOVO" appears on the screen, press "F12" to enter "Boot Menu" interface and select "IDE ODD: HL-DT-STDVDRAM GT30N-(S5)". Press "Enter" for confirmation.
2. After several seconds, the sentence "Press any key to boot from CD..." will appear on the screen.
3. After booted from CD/DVD, the following interfaces will appear continuously.
4. Keep the default for the above interfaces. For the items of "Language to install", "Time and currency format" and "Keyboard or input method", select "English", "English (United State)" and "US"respectively, then click "Next".
5. Selecting the operating system. This stage may be different for PCs with different system versions when leaving factory. Select a proper one and Click "Next".
6. Accept the license terms, and click "Next".
7. Enter the Partition interface, click "Drive options (advanced)".
8. Click "New" to create new partition.
9. Set up the partition capacity and click "Next".
10. In case of a brand new HDD or re-partition after deleting all the partition, Windows 7 will automatically generate a 100 M space to keep the boot files as Fig.12 shows. Click "OK".
11. You will see that a 100M space still remains besides the new built partiton and unallocated space.
12. Partition the left space by the same means.
13. Choose the partition for installation and click "Next".
14. The system begins to install automatically.
15. PC will restart after finishing "Installation update".
16. Windows starting interface appears.
17. Installation will run automatically.
18. At this stage, installation will restart again and check the host automatically.
19. With the completion of checking, it will enter the following interface,
20. Set password. Note: if the password is set, its hint must be set. There can be no password. Click "Next". Another way to set password: entering the system, go to "control panel" and set password in user account.
21. Set time and date, click "Next".
22. The system is finalizing your settings and starts.
23. If password is set, the "logging in" interface will pop up. Enter the password and click "->"
24. Entering desktop, the installation is finished.
recover router password
1. Set for CD/DVD boot: insert the installation CD into the optical disk drive (ODD) and restart PC. When starting up logo "LENOVO" appears on the screen, press "F12" to enter "Boot Menu" interface and select "IDE ODD: HL-DT-STDVDRAM GT30N-(S5)". Press "Enter" for confirmation.
2. After several seconds, the sentence "Press any key to boot from CD..." will appear on the screen.
3. After booted from CD/DVD, the following interfaces will appear continuously.
4. Keep the default for the above interfaces. For the items of "Language to install", "Time and currency format" and "Keyboard or input method", select "English", "English (United State)" and "US"respectively, then click "Next".
5. Selecting the operating system. This stage may be different for PCs with different system versions when leaving factory. Select a proper one and Click "Next".
6. Accept the license terms, and click "Next".
7. Enter the Partition interface, click "Drive options (advanced)".
8. Click "New" to create new partition.
9. Set up the partition capacity and click "Next".
10. In case of a brand new HDD or re-partition after deleting all the partition, Windows 7 will automatically generate a 100 M space to keep the boot files as Fig.12 shows. Click "OK".
11. You will see that a 100M space still remains besides the new built partiton and unallocated space.
12. Partition the left space by the same means.
13. Choose the partition for installation and click "Next".
14. The system begins to install automatically.
15. PC will restart after finishing "Installation update".
16. Windows starting interface appears.
17. Installation will run automatically.
18. At this stage, installation will restart again and check the host automatically.
19. With the completion of checking, it will enter the following interface,
20. Set password. Note: if the password is set, its hint must be set. There can be no password. Click "Next". Another way to set password: entering the system, go to "control panel" and set password in user account.
21. Set time and date, click "Next".
22. The system is finalizing your settings and starts.
23. If password is set, the "logging in" interface will pop up. Enter the password and click "->"
24. Entering desktop, the installation is finished.
recover router password
-
- Podobná témata
- Odpovědi
- Zobrazení
- Poslední příspěvek
